Tamiya 58754 1/12 SCALE R/C CAR Lamborghini Cheetah (2026)

這是以1977年日內瓦車展上發表的藍寶堅尼原型軍用車輛 Cheetah 為藍本的電動 RC 組裝套件，保留1978年問世當時的基本構成並施以改良。以直線為基調、無車門的粗獷造型，以耐衝擊性苯乙烯樹脂忠實重現；儀表板、座椅、滅火器等室內細節也以立體感十足的方式模型化，車尾的金屬網格板也一併備妥，完成度極具規模感。附駕駛員人形，增添行駛的實感。

底盤採用輕量堅固的杜拉鋁板成形為槽型的框架。走行電池縱置於中央、馬達設於後部驅動後輪的 2WD 車體結構；後部左右的杜拉鋁製電裝支架安裝接收機與 ESC，重量平衡亦十分優異。後端齒輪箱為可阻擋灰塵與小石入侵的密閉式。懸吊為前雙A臂左右獨立、後帶穩定桿的 3 連桿剛性式，前後皆配備 CVA 油壓避震。輪胎為 V 字紋路特徵的扁平胎面中空橡膠；3 片式高強度輪圈以 5 根螺絲固定於輪轂，牢牢抓緊輪胎。此外，裝備守護車體免於碰撞的杜拉鋁前底護板；前後車身皆以內側卡扣嵌入底盤、安裝座不外突的設計，極具規模感。

【基本規格】●完成時全長394mm、全寬297mm、全高222mm・軸距217mm・車重約1,660g（不含RC電裝與電池）●輪距前後均228mm ●驅動方式=後輪2WD ●差速器=3傘齒輪式 ●轉向=左右等長2分割橫拉桿式 ●懸吊=前雙A臂左右獨立／後帶穩定桿3連桿剛性 ●避震器=前後CVA油壓避震 ●齒輪比=14.7:1 ●輪胎寬/徑=前後均71/115mm ●馬達=540型 ●全滾珠軸承規格 ●ESC另售

This is an electric R/C assembly kit of the Lamborghini Cheetah, the prototype military vehicle the company unveiled at the 1977 Geneva Motor Show, with improvements added while retaining the basic layout of the original released in 1978. The austere, doorless form based on straight lines is realistically reproduced in impact-resistant styrene resin; the interior is also modeled with plenty of three-dimensional detail, including the meter panel, seats, and fire extinguisher, while mesh for the rear plate is prepared for a highly scale finish. A driver figure is included to enhance the sense of driving.

The chassis employs a lightweight, durable channel-frame built from formed duralumin plate. The running battery sits vertically in the center, with the motor mounted at the rear driving the rear wheels in this 2WD layout; the receiver and ESC mount on duralumin stays at the left and right rear for excellent weight balance. The rear gearbox is a sealed unit that shuts out dust and small stones. Suspension features independent double wishbones at the front and a 3-link rigid axle with stabilizer at the rear, with CVA oil dampers front and rear. Tires are hollow rubber with a distinctive V-pattern on a flat tread; the strong 3-piece wheels hold the tires firmly, attached to the hubs with five screws. A duralumin front underguard protects the body from impacts, and both front and rear bodies hook onto the chassis via inner catches without protruding mounts, for a highly scale result.

[Basic Spec] Length 394 mm, width 297 mm, height 222 mm, wheelbase 217 mm; weight approx. 1,660 g (without R/C equipment and battery) / tread 228 mm front and rear / rear-wheel 2WD / 3-bevel differential / equal-length 2-piece tie-rod steering / front double wishbone, rear 3-link rigid with stabilizer / CVA oil dampers front and rear / gear ratio 14.7:1 / tires 71 mm wide, 115 mm dia. / 540-type motor / full ball bearings / ESC sold separately